(1) Good energy saving effect
The main purpose of adopting intelligent lighting control system is to save energy. With the help of various "preset" control methods and control elements, the intelligent lighting control system can accurately set and reasonably manage the illuminance in different time and different environment, so as to realize energy saving. This way of automatically adjusting the illuminance makes full use of the outdoor natural light. Only when necessary, the lamp is lit or lit to the required brightness. The minimum energy is used to ensure the required illuminance level. The power saving effect is very obvious, generally up to more than 30%. In addition, in the intelligent lighting control system, the dimming control is carried out for the fluorescent lamp. Because the fluorescent lamp adopts the adjustable optoelectronic ballast of active filter technology, the harmonic content is reduced, the power factor is improved and the low-voltage reactive power loss is reduced.
(2) Extend the life of light source
Prolonging the service life of the light source can not only save a lot of money, but also greatly reduce the workload of replacing the lamp tube, reduce the operation cost of the lighting system, and simplify the management and maintenance. Whether it is a thermal radiation light source or a gas discharge light source, the fluctuation of power grid voltage is a main reason for the damage of the light source. Therefore, effectively suppressing the fluctuation of power grid voltage can prolong the service life of light source.
The intelligent lighting control system can successfully suppress the surge voltage of the power grid. At the same time, it also has the functions of voltage limiting and yoke current filtering to avoid the damage of overvoltage and undervoltage to the light source. Soft start and soft off technology are adopted to avoid the damage of impulse current to the light source. Through the above method, the service life of the light source can be extended by 2 ~ 4 times.
(3) Improve working environment and work efficiency
A good working environment is a necessary condition to improve work efficiency. Good design, reasonable selection of light sources, lamps and excellent lighting control system can improve the lighting quality.
The intelligent lighting control system uses the dimming module control panel to replace the traditional flat switch to control the lamps, which can effectively control the overall illuminance value in each room, so as to improve the illuminance uniformity. At the same time, the electrical components used in this control mode also solve the stroboscopic effect and will not make people feel uncomfortable, dizzy and tired eyes.
(4) Achieve a variety of lighting effects
A variety of lighting control methods can make the same building have a variety of artistic effects and add a lot of color to the building. In modern buildings, lighting is not only to meet people's visual light and dark effects, but also should have a variety of control schemes to make the buildings more vivid, more artistic and give people rich visual effects and beauty. Taking a project as an example, if the exhibition hall, lecture hall, lobby and atrium in the building are equipped with intelligent lighting control system and controlled by corresponding preset scenes according to their different time, different purposes and different effects, rich artistic effects can be achieved.
(5) Convenient management and maintenance
The intelligent lighting control system mainly controls the lighting with modular automatic control, supplemented by manual control. The parameters of lighting preset scenes are digitally stored in EPROM. The setting and replacement of these information are very convenient, which makes the lighting management and equipment maintenance of the building easier.
(6) High economic return
From the estimation of power saving and light saving, we draw a conclusion that in three to five years, the owner can basically recover all the increased costs of the intelligent lighting control system. The intelligent lighting control system can improve the environment, improve staff work efficiency, reduce maintenance and management costs, and save a considerable amount of expenses for the owner.
Conclusion: no matter how the intelligent lighting system develops, its purpose is to bring better functionality on the premise of providing light. Rendering the atmosphere, providing heat and even home security are a trend. On this premise, if we can control the energy consumption, then the intelligent lighting system will undoubtedly have a significant impact on our life in the future.
Post time: Mar-25-2022
